THANK YOU FOR YOUR ENQUIRY

Dear
Thank you for your enquiry.
To help us best serve your enquiry, you can upload any photos that highlight areas of concern.

We're happy to answer any questions you may have, and will get back to you as soon as we can.
In the meantime, please feel free to contact us on 02 9386 5522

02 9386 5522

Sydney Sealer Stripping

Some tiles come sealed with a basic sealer at the factory, others might have to be sealed prior and after the installation. Depending on the area, location, traffic, maintenance and environment, previously sealed surfaces will eventually need to be sealed again.

Before the application of a new sealer, all old sealers must be removed completely, the surfaced dried then sealed with a new sealer. 

Stripping is not a DIY job. To be done properly, it must be undertaken by an experienced operator and requires special equipment and chemicals. Stripping can be a tricky task and if not done properly, permanent damage to the tiles can occur. Once all the sealer has been removed the tiles must be dried and then sealed with appropriate number of coats of sealer. Solvent based sealers are much more difficult and time consuming to strip. The stripping of solvent sealers also gives off harmful fumes so adequate ventilation during the stripping process is vital. Some previously solvent sealed tiles might not be strippable, in which case a heavy duty clean and etch is required and a seal using the same or stronger sealer is recommended. 

before and after stripping sealer floor

To schedule your appointment or to obtain a free estimate, please Call 02 9386 5522 or use our online enquiry form. We cover all Sydney Suburbs.

Grout Float
Tile Scrubbing Brush
Tile Repair Tool Rubber
Stripping Vacuum
Floor Scrubber

CONTACT US NOW FOR AN OBLIGATION FREE QUOTE


sydney van

Field Service Management Software

Sydney tile repairs
Please wait...